M-Trigger Classic Hardware Kit

All required hardware for printing your own M-Trigger.

• 3x20mm extension spring

• 3x10mm extension spring

• (2) M2 heat set threaded inserts

• (2) M2x8 screws

• (4) M2 oversized washers ([example](https://www.mcmaster.com/91116A240/))

• Standard sized 20x10x6mm ish SPDT lever microswitch

A hardwired mosfet is required. We recommend the Perun AB++. Also compatible: Gate X-ASR, NanoASR, NanoHard, MERF, Warfet.

Files here.